Description
Options Available:
– Get 1 light for $23, or
– Set of 2 lights for $44 ($22 each)
– Set of 3 lights for $63 ($21 each)
– Set of 4 lights for $76 ($19 each)
Money Back Guarantee.
– Not thrilled by your purchase? Not quite what you expected?
– Not a problem, send it back to get a full refund. For opened items, I will pass it on to families in need. I want you to be 100% satisfied with what you got!
Concept:
This is an absolute game changer! No need for voice activation, no need for wide flailing of arms expanding unnecessary energy. Visualize walking around your house & lights turn on and off naturally as you enter a room, pick up a jacket, and leave again. No worries about forgetting, and leaving lights on after you’ve left the house. This is truly smart living with intuitive products!
For my elderly parents, they get up frequently during the night to go to the bathroom. Instead of fumbling with light switches, and squinting with harsh lighting, I put a light along the edge of the bed, and along the route from bedroom to living room at the bottom. This way, they just get off the bed, find their house slippers easily, walk naturally to the bathroom and back without disrupting their sleep too much.
In wardrobes, our body blocks the room light, so you have to take things out to see properly. By sticking one of these lights inside, it’s so easy to find things and place them where they belong. Wardrobe organization is so much easier with this convenient interior motion sensor light!
Tips from me:
– Stick the magnets 1 inch above ground, so that you can still mop, sweep or Swiffer easily without dislodging the light.
– Stick preferably on corridor wall skirting or marble surfaces, as the magnet adhesive stickers will tear off paint when you remove them after years.
– If this happens, not a problem, use putty to fix. As a quick fix, I have even used scotch tape and paint over.
Specifications:
– Instant automatic reaction – 0 seconds to activate, no delayed reaction or wait time.
– 120 degrees wide angle, 3m smart sensor range
– matte dome cover ensures that the light isn’t harsh and doesn’t hurt your eyes even when you’re looking directly at the white light.
– 1200 mAh super long lasting battery only requires charging 4 times a year. Each full charge lasts 3 months if it turns on and off 4 times a day. More frequent use will need charging sooner of course. Even so, I charge them maybe once every 2 to 3 months.
– Size 15cm x 4.5cm, similar to mobile phone, lightweight and convenient to stick anywhere discreetly.
– no blue light and so no flickering
– no unsightly wires for constant power source
– no drilling required, super easy to set up
How to Use:
– It’s really convenient to remove & charge and snap back on. Super fuss free!
– There are 2 round magnets with 3M adhesive stickers.
– Fix both magnets onto the back of the light
– Remove the back 3M adhesive stickers.
– Stick onto surface and press for 10 seconds. Voila!
Settings:
– Press side power button once quickly for Constant Reading Light (will not switch off)
– Press side power button once again for Motion Sensor Light
(forgot which mode you’re in? If Motion Sensor Light is activated, a Red Light will flash for 3 seconds to indicate)
– Press side power button once again to switch the light completely off.
– Press side power button and hold as long as you need, to switch from 10% Warm light to 100% natural White light.
– Let go when the brightness is acceptable for you.
Note:
– Do not keep this light constantly plugged into a power source. It will damage the light as i’s meant to be wireless.
– While charging, the light has a constant Red light. Remove from USB charger once it turns Green.
Reviews
There are no reviews yet.